General questions

	TS Terminal Installation Procedure
	Soft and hardware Demands
	Working On-line
	Database BDE Main Kernel and Terminal Installation

Here are some brief recommendations of how to install Terminal. Terminal is an ordinary program working on Windows platform. Terminal can be installed on any personal computer with any of the following Russian or Russian-adopted platforms - Windows 3.1 / 3.11 / 95 / 98 / NT / 2000.

	If you don't have an access to Internet, you should contact any Internet provider, their services are at reasonable price nowadays;
	In case that installation software is not available, you can upload it. You will need two files - bde252.zip and rvs21.zip.
	Next, get to installation of Terminal: first, unpack bde252.zip and rvs21.zip files; second, run setup.exe and install.exe programs;
	Go through the registration procedure to be able to put your requests into the System.

Read further for the above steps detailed description.

Here are some brief recommendations of how to install Terminal. Terminal is an ordinary program working on Windows platform. Terminal can be installed on any personal computer with any of the following Russian or Russian-adopted platforms - Windows 3.1 / 3.11 / 95 / 98 / NT / 2000.

Internet channels are used to transfer data between TS Terminals and Servers. A computer, which appears a terminal, should have an access to Internet (with the only exception of using terminals in the local net, where only one computer may have an access to Internet).

To get connected to Internet one should take advantage of any Internet provider's services.The average price for the services is about $10.0 - $30.0 for first connection, and commonly does not exceed $1.0 per hour. It will not cost you too much as the terminal gets connected ONLY during the on-line session with RVS Server to send/receive new requests (at a speed of some hundreds requests/minute). As for operating Terminal itself, - you may safely work off-line.

The Database BDE (version 2.52) Main Kernel should be installed on Computer to provide efficient work of Terminal. The Main Kernel procures low-level inter-actions between Terminal and the local database.

To install the Main Kernel, copy bde252.zip file, unpack it and run the installation-program setup.exe. While installing, just press Enterto confirm recommended installation settings.

After the Main Kernel has been installed, re-start the computer.

To install the TS Terminal, copy rvs21.zip file, unpack it and run the installation-program install.exe.

	rvs21.zip version 1.0 (~1 Mb)
	bde252.zip (1496 Kb) *

* The Database BDE Main Kernel is accessible floppy disks filed accordingly as bde252_1.zip (491 Kb) and bde252_2.zip (1005 Kb). So, you can copy one file bde252.zip or two files bde252_1.zip and bde252_2.zip.

If due to insufficient communication channels you can not copy that big files, you may copy them by less installments. As for Terminal, it works perfectly despite bad communication channels quality.

To complete Terminal installation, just press Enter to confirm the recommended installation settings. Look through Context Help for more detailed information concerning operating Terminal.

We would srongly recommend you to look through "FAQ" list prepared by our Technical Support Service. To copy the list (11 Kb), click here.

You should install Terminal directly on the computer where it is supposed to be operated later on. This is a must, as Registration procedure will necessarily associate System with this very computer, and in case of transferring Terminal to another computer, an additional Registration will be demanded.

After TS has been installed, you should go through registration to be able to put your requests in Trade System.